[请教]proteus中是否可以导入实际波形文件
请教Proteus高手,我将外部模拟信号用数据采集卡采集到计算机中保存为txt文件后,是否可以将此信号波形文件导入到Proteus文件中进行仿真,好多方法我都试了,可是都不行,所以在此请教高手。万分感谢! 哪位大侠帮一下忙呢! 请求版主审核一下! 请高手进来指导! 完全可以 请教楼上怎么来导入呢? 回复【4楼】Hamyou-----------------------------------------------------------------------
向你请教,怎么来导入呢? 围观下 呼唤高手帮帮忙啊! http://cache.amobbs.com/bbs_upload782111/files_48/ourdev_702138RBUII6.jpg
(原文件名:1.jpg)
数据格式你得自己转换一下:
File
This is used to drive a circuit from an analogue signal that is specified by a series of time points and data values contained in an ASCII file. The ASCII file should be formatted with one time/voltage pair on each line seperated by white space (spaces or tabs , not commas ). The time values must be in ascending order and all values must be simple floating point numbers ( no suffixes allowed ).
Example
The following example data file produces three cycles of a saw-tooth waveform with rise time 0.9ms,fall time 0.1ms and amplitude 1V.
0 0
9E-4 1
1E-3 0
1.9E-3 1
2E-3 0
2.9E-3 1
3E-3 0
Audio
This is used to drive a circuit from a Windows WAV file. In conjunction with Audio Graphs they make it possible to hear the results of processing a sound signal through a simulated circuit. mark yi time 回复【9楼】gzhuli 咕唧霖
-----------------------------------------------------------------------
是用File吗?我导入的是txt文件,但是导入到proteus的信号无法循环显示txt文件中的数据。
页:
[1]