CCS5.3连接不上SEED XDS510PLUS Emulator
IDE:Code Composer Studio Version: 5.3.0.00090目标板：SEED_DEC28335 V1.5
仿真器：SEED XDS510PLUS
目标配置：
Test Connection报告：
Execute the command:
%ccs_base%/common/uscif/dbgjtag.exe -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
-----------------------------------------
C:\Users\Ren\AppData\Local\.TI\3438098274\
0\0\BrdDat\testBoard.dat
----------------------------------
This utility has selected a 100- or 510-class product.
This utility will load the adapter 'seedjca8990isa.dll'.
The library build date was 'Oct3 2012'.
The library build time was '21:58:41'.
The library package version is '5.0.872.0'.
The library component version is '35.34.40.0'.
The controller does not use a programmable FPGA.
The controller has a version number of '1' (0x00000001).
The controller has an insertion length of '16' (0x00000010).
This utility will attempt to reset the controller.
A error occurred while attempting to reset the controller.
-------------------------
This error is generated by TI's USCIF driver or utilities.
The value is '-342' (0xfffffeaa).
The title is 'SC_ERR_HUNG_COMMAND'.
The explanation is:
Failure due to the controller command-finish taking too long.
mark !!!!!!!! 最好看看设备管理器中 仿真器有没有 驱动是否安装 测试下JTAG口的电压 后来试了几台电脑都有这个问题，实际上TEST功能里面报出“This error is generated by TI's USCIF driver or utilities.”这个错误是由于仿真器不兼容引起的，但是这并不影响使用，还是可以正常进入DEBUG模式仿真调试，程序下载也没有问题。 你的仿真器驱动需要升级。
页:
[1]