C2000仿真时连接错误
C2000使用TI的开发套件仿真，连接时出现如下错误提示，测量芯片JTAG等引脚连接正常，请问可能是什么原因造成的？C28xx: Failed CPU Reset: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0)
C28xx: Trouble Reading Register PC: (Error -1137 @ 0x0) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0)
C28xx: Trouble Reading Register ST1: (Error -1137 @ 0x6) Device is held in reset. Take the device out of reset, and retry the operation. (Emulation package 5.1.450.0)
C28xx: GEL: Error while executing OnReset(1): Target failed to read register ST1 at (ST1&~(0x0100)) at C28x_Mode() at OnReset(1) .
量量复位引脚，是不是CPU一直处于复位状态？ wanderhope 发表于 2015-5-7 15:00
量量复位引脚，是不是CPU一直处于复位状态？
谢谢，测下来的确是复位脚一直是低电平造成的。复位脚有接上拉，且上拉后的3.3V也正常的，就是复位脚还是低电平，不只是什么原因，正在查找，希望不是复位脚坏掉了
页:
[1]