[转PDF]Intelligent Battery Charger Reference Design(PIC)
INTRODUCTIONTypically, simple battery chargers do not provide the
intelligence to charge different battery technologies or
batteries with the same technology but different voltages
and capacities. At best, this may leave the battery
improperly charged. At worst, it can pose a serious
safety hazard. A microcontroller can provide the intelligence
to overcome these problems.
In addition to intelligent control, the microcontroller can
provide a low-cost, flexible solution for charging batteries.
Complete battery charging applications may be
developed quickly using a microcontroller. Add to this
the serial communication capability of the microcontroller,
real-time data logging and monitoring is possible.
Simple battery chargers use all analog components to
accomplish their function. However, by using a microcontroller,
a battery charger can be made intelligent.
原文请见附件：
点击此处打开ourdev_179322.pdf(文件大小:695K) 谢谢。 很详细啊。。 有点可惜是英文。 好资料，学习ing.
和我们技术规范书很接近啊，不过好像我们没有计划用运放。
如果有朋友能将第4页从Buck Convert直到第7页Battery Pack之前的内容翻译一下最好了，包括了Buck Convert(Basics&Detail)、Calculating of the inductor value、Senses(Current、Voltage、Temperature)、Filter这几个部分是最核心的。
上上周本来打算第二次讨论前把Grant提供的一份资料中关于Buck和SEPIC的那两页翻译出来，可惜上班太多事了，英语看问题不大，真正要译的好还真不容易，没有完成。
页:
[1]