kinglin 发表于 2008-6-30 22:37:17

再发一个PIC-IO 成品板，也是那老外的产品，带有部分上位机程序，源码。

因为有些类PLC 功能，所以发到这个板块了。

http://cache.amobbs.com/bbs_upload782111/files_10/ourdev_332403.jpg
(原文件名:PIC-IO.jpg)

http://cache.amobbs.com/bbs_upload782111/files_10/ourdev_332404.jpg
(原文件名:PIC-IO-BOT.jpg)

http://cache.amobbs.com/bbs_upload782111/files_10/ourdev_332405.jpg
(原文件名:PIC-IO-TOP.jpg)

http://cache.amobbs.com/bbs_upload782111/files_10/ourdev_332406.gif
(原文件名:PIC-ICSP.gif)

http://cache.amobbs.com/bbs_upload782111/files_10/ourdev_332407.gif
原理图 (原文件名:PIC-IO-sch.gif)

几个源码文件合在一起了。ourdev_332408.rar(文件大小:1.12M) (原文件名:PIC-IO.rar)
FEATURES

ICSP/ICD connector for programming with PIC-MCP-USB, PIC-MCP or PIC-PG1, PIC-PG2, PIC-PG3, PIC-PG4 and debugging with PIC-ICD2, PIC-ICD2-POCKET, PIC-ICD2-TINY(* for the PICs with ICD support)
Power plug-in jack for +12VDC power supply
Voltage regulator +5V, 78L05 and filtering capacitors
status LED connected to RB5
Quartz crystall oscilator circuit 20Mhz
DIL18 microcontroller socket
RS232 DB9 female connector
RS232 interface circuit with Tx, Rx signals
4 optocoupler isolated inputs with screw terminals
input status LEDs
4 relay outputs with 10A/250VAC contacts with screw terminals
output status LEDs
FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
Dimensions 100x80 mm (3,9x3,15")
DOCUMENTS:

PIC-IO.pdf - PIC-IO users manual
PIC-IO tutorial (English)
PIC-IO tutorial (Spanish)
HARDWARE:

PIC-IO schematic
PIC ICSP connector
SOFTWARE:
PIC-IO control of the outputs and inputs via RS232 (C source and HEX)
PIC-IO RS232 send and receive demo code (C source and HEX)
PIC-IO Blinking LED (C source and HEX)
PIC-IO tutorial software
ORDERING CODES:               
                PIC-IO Completely assembled and tested with 20MHz oscillator
                PIC-IO-628 Completely assembled and tested with 20MHz oscillator and PIC16F628 with the demo control software pre-loaded

guaibaobao 发表于 2008-6-30 22:57:44

留个脚印！先谢了啊。

manbkk 发表于 2008-7-1 00:38:09

不错!

dogcome 发表于 2008-7-3 11:16:31

mark

zxq6 发表于 2008-7-3 11:17:44

不太清楚这个家伙是干嘛用的。

zxqwork 发表于 2008-7-3 22:27:24

c4?c5?

mljda 发表于 2008-7-3 22:32:02

留！

qd118 发表于 2008-7-4 14:44:06

图中光耦有点别扭

chendaon 发表于 2008-7-4 15:26:31

替代继电器二次回来的吧

szhyk 发表于 2010-12-1 15:37:16

yanjiuyanjiu.

weigh55 发表于 2011-3-16 11:22:33

mark

benladn911 发表于 2011-3-16 12:19:21

继电器如果是控制强电的话，那安规过不了。

Automaticc 发表于 2011-3-16 16:28:16

不错，用单片机控制强电。。。

lzzxxn 发表于 2011-3-25 09:17:09

留下了

e-sun 发表于 2013-5-21 23:24:03

{:smile:}不错，有点PLC的范，

majiansongok 发表于 2013-6-9 17:21:29

好东西，真的不错

zhangfuhg 发表于 2013-11-26 22:36:44

单片机控制板而已！网上大把！

xifengxia 发表于 2013-12-17 10:33:37

收下了,继电器控制的IO端口需要光耦隔离吗?

lijunfeng 发表于 2013-12-17 10:48:27

好东西，收下了
页: [1]
查看完整版本: 再发一个PIC-IO 成品板，也是那老外的产品，带有部分上位机程序，源码。