rayt 发表于 2011-1-29 13:52:57

CC2500能否接收NRF24L01的数据包？

由于NRF24L01不带RSSI功能，想用CC2500检测信号强度，看到DATASHEET CC2500有GFSK调制方式，跟NRF24L01相同，
因为要判断数据有效性，不知道能否接收到2401的数据包？
哪位大侠实验过？

ssaweee 发表于 2011-1-29 14:05:48

NRF24L01+可以检测信号强度样

rayt 发表于 2011-1-29 16:57:26

回复【1楼】ssaweee
-----------------------------------------------------------------------
只是一位标示，没有具体的强度值的

Received Power Detector (RPD), located in register 09, bit 0, triggers at received power levels above -64
dBm that are present in the RF channel you receive on. If the received power is less than -64 dBm,
RDP = 0.

sherwih 发表于 2011-7-14 17:32:22

应该可以的，只要设定在相同的信道上应该没问题吧
页: [1]
查看完整版本: CC2500能否接收NRF24L01的数据包？