有哪些低压差的DC DC降压芯片方案?
输入电源电压约4.5-6.6v(因为是4节5号电池和USB双源供电的,考虑了电源电压波动),降到不少于3.5v(不超过4.5v,建议4.2v左右),用于4G模块的供电。 SY8089Features
• Low RDS(ON) for internal switches
(top/bottom):110mΩ/80mΩ
• 2.7-5.5V input voltage range
• 2A continuous, 3A peak load current capability
• 1MHz switching frequency minimizes the external
components
• Internal softstart limits the inrush current
• Reliable short circuit protection:
SY8089: Latch off protection
SY8089A: Hic-cup mode protection
• Reliable over-voltage protection:
SY8089: Latch off protection
SY8089A: No latch off protection
• 100% dropout operation
• RoHS Compliant and Halogen Free
• Compact package: SOT23-5
看了下不符合,抱歉 本帖最后由 Himem 于 2023-6-7 12:10 编辑
直接用buckboost榨干吧
比如 TPS63070 sp1231100%占空比的降压芯片。 mp2147 , 肯定可以,就是比较贵,8元左右; 低压差DC DC效率不一定有LDO高呀 MYQQ2021 发表于 2023-6-7 12:14
低压差DC DC效率不一定有LDO高呀
(引用自7楼)
同疑惑,都低压差了,LDO不香吗? EMC菜鸟 发表于 2023-6-7 14:02
同疑惑,都低压差了,LDO不香吗?
(引用自8楼)
LDO输出电流低,效率比不上DCDC sys_suweixiao 发表于 2023-6-8 11:17
LDO输出电流低,效率比不上DCDC
(引用自9楼)
4.5-6.6V的电池输入,全程综合下来,LDO的效率并不比DC/DC低多少。
页:
[1]