电工神器"阿莫AMCNC04雕刻,激光,3D打印三合一机"上市【教程】

funnynypd · 发表于 2016-12-27 23:25:04

》激光IC打磨升级套装
This is interesting, any introduction?

Actually what I will need is a 2-in-1. I have a dedicated 3D printer. And I don't want to use the expensive CNC as the function of relatively low cost of 3D printing.
Would it be possible to sell a model for single CNC and a combine of 2-in-1 of CNC and laser?

funnynypd · 发表于 2016-12-28 00:34:17

本帖最后由 funnynypd 于 2016-12-28 00:49 编辑

what is the z axle pass-through dimension?
This is a new year's gift.

funnynypd · 发表于 2016-12-28 00:43:01

This is a well designed machine, it will also have a deep learning curve.

funnynypd · 发表于 2016-12-28 00:53:41

This image is interesting, do you have a curve for plastics, including the material for IC package?

funnynypd · 发表于 2016-12-28 00:59:40

>他问的是龙门通过高度吧
Yes.

funnynypd · 发表于 2016-12-28 01:08:47

本帖最后由 funnynypd 于 2016-12-28 01:12 编辑

We have been playing 3-d printing for many years. It is a good prototype choice.
However, different material needs different tricks on 3d printing.
Most of the US 3d printer vendor choose to stay away from ABS, since it is very hard to stick to the hot-bed, and it needs a closed space with temperature-controlled environment to get the best result.

To put 3 feature in one machine is a good idea. It takes a lot of efforts for the designer.
Again, good job.

I am also excited to know that a 2W laser can erase the IC marks, this definitely is a good feature.
For designers in North American, there is no way to keep your end product away from being cloned.
For IP protection purpose, Encryption with software and hardware is one thing, get all those IC marks erased after the product is tested is another advantage to get yourself protected. I love it.

funnynypd · 发表于 2016-12-28 01:09:53

本帖最后由 funnynypd 于 2016-12-28 01:22 编辑

>可以到我们的国外代理商(ebay)购买。
Do you have a ebay seller's ID?
By the way, for most of people here: the ebay is majorly considered for used goods and low cost alternatives. Amazon seller may be your choice from brand point of view.
Compare of the two largest platform: Amazon takes away at least 15% of the price , I don't know how many percent ebay will take away.

funnynypd · 发表于 2016-12-28 01:25:02

>打标机一般用的是1064nm YAG激光器吧
a 10W of fiber-laser marker cost around ¥16000 at taobao.

funnynypd · 发表于 2016-12-28 04:43:13

本帖最后由 funnynypd 于 2016-12-28 04:46 编辑

>要卖50美元
You mean 500K USD$?
Just finished a quick look on cnc on Taobao, it looks the AMCNC01 are cloned all over the place.
Some looks so similiar on structure. I start to worry about how do you protect your own IP for such an innovation.

https://item.taobao.com/item.htm ... amp;_u=t2dmg8j26111

funnynypd · 发表于 2016-12-28 04:50:49

本帖最后由 funnynypd 于 2016-12-28 04:52 编辑

>雕刻机这个速度就2W半导体激光器慢慢烧呗。
There are 5.5W semi-laser cost around US$ 249.50 with shipping included world-wide.
445nm 5.5W 5500mW Blue Laser Module With Heatsink For DIY Laser Cutter Engraver
http://www.banggood.com/445nm-5_ ... 3.html?rmmds=search
There are report that if the CNC is not moving fast enough, it will create a fire on paper or plastics.

funnynypd · 发表于 2016-12-28 10:50:05

>所以，03机不会有激光功能，也不会有3D打印功能。
It is actually most of the CNC user want. Most of the time, we don't care about 3D printer or Laser.

funnynypd · 发表于 2016-12-28 23:00:58

For 3d printing, the nozzle can be jammed, having a jammed nozzle cleaned requires lot of efforts.

funnynypd · 发表于 2016-12-29 23:18:12

>按进度，03机应该比这台04机还会早一些发布的。
>将不对外销售。
Both are good. It will help sort out any potential design faulty before it is final release.

funnynypd · 发表于 2016-12-29 23:19:15

>200mw激光能干嘛？讲ppt吗？
Making marks on paper, wood, and bamboo.

funnynypd · 发表于 2016-12-29 23:23:24

If ball bearing is using, will the z axle falling down automatically when the machine is powered off?

funnynypd · 发表于 2016-12-29 23:24:22

本帖最后由 funnynypd 于 2016-12-29 23:25 编辑

This youtube video using a servo, and it won't hold the z axle, so a brake is added:
https://www.youtube.com/watch?v=7CB_rw-3ibc
It is amazing that now days the servo only cost around 300 bucks, and it is made in USA.

funnynypd · 发表于 2016-12-30 05:14:34

>三年前我们已经给03机加上刹车器了。

In the youtube video, the used Inertia Dynamics brake: 8923-2331 - purchased from eBay for USD$219.90:

http://www.ebay.com/itm/BAYSIDE- ... AMICS-/191195740067

I cannot find the new parts price.
The 3d model step file is attached.

funnynypd · 发表于 2016-12-30 05:18:22

Compare with AMCNC01 and AMCNC04, I believe there may be people like the AMCNC01 a bit more.

funnynypd · 发表于 2016-12-31 00:15:54

本帖最后由 funnynypd 于 2016-12-31 00:25 编辑

There is a z axle cover missing on this particular machine.

funnynypd · 发表于 2017-1-2 22:52:15

for mill bits, only small diameter is recommended, 0.8mm, 1mm, 1.2mm.

funnynypd · 发表于 2017-1-7 22:26:33

>我刚刚替单位选购的一台激光刻字机刻出的(10W功率)，友情价2.6W
Do you have the model and part number?

funnynypd · 发表于 2017-1-22 23:54:42

Would it be possible to make this 4-in-1 machine?
Add a solder iron to make it a solder robot.

funnynypd · 发表于 2017-2-28 13:01:02

Can the laser be used to cut the acrylic sheet?

电工神器"阿莫AMCNC04雕刻,激光,3D打印三合一机"上市【教程】

阿莫论坛20周年了！感谢大家的支持与爱护！！

本帖子中包含更多资源