|
|
本帖最后由 454234682 于 2014-9-29 22:17 编辑
求助啊！ 如下：
CHK include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
make[1]: `include/generated/mach-types.h' is up to date.
CALL scripts/checksyscalls.sh
CC scripts/mod/devicetable-offsets.s
GEN scripts/mod/devicetable-offsets.h
HOSTCC scripts/mod/file2alias.o
HOSTLD scripts/mod/modpost
CHK include/generated/compile.h
CHK kernel/config_data.h
Kernel: arch/arm/boot/Image is ready
LD arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready1
multiple (or no) load addresses:
This is incompatible with uImages
Specify LOADADDR on the commandline to build an uImage
make[1]: *** [arch/arm/boot/uImage] Error 1
make: *** [uImage] Error 2
[root@localhost linux-3.9.9]#
其中linux-3.9.9/arch/arm/boot/makefile 中已经
ifneq ($(LOADADDR),)
UIMAGE_LOADADDR=$(LOADADDR)
else
ifeq ($(CONFIG_ZBOOT_ROM),y)
UIMAGE_LOADADDR=$(CONFIG_ZBOOT_ROM_TEXT)
else
UIMAGE_LOADADDR=$(ZRELADDR)
endif
endif
可是为什么读不到LOADADDR呢？
|
|
发表于 2014-9-29 22:16:16
楼主