|
发表于 2015-5-22 10:59:41
|
显示全部楼层
Warning [1273] ; . Omniscient Code Generation not available in Free mode
Memory Summary:
Program space used 5E0Ah ( 24074) of 8000h bytes ( 73.5%)
Data space used C4h ( 196) of 600h bytes ( 12.8%)
Configuration bits used 2h ( 2) of 7h words ( 28.6%)
EEPROM space used 0h ( 0) of 100h bytes ( 0.0%)
ID Location space used 0h ( 0) of 8h bytes ( 0.0%)
Data stack space used 0h ( 0) of 52Eh bytes ( 0.0%)
Running this compiler in PRO mode, with Omniscient Code Generation enabled,
often produces code which is 60% smaller and at least 400% faster than in
Free mode. The MPLAB XC8 PRO compiler output for this code could be
14648 bytes smaller and run 4 times faster.
See http://www.microchip.com for more information.
Loaded E:\!wai\JACK\DC Energ\PRG18\Engmet18.cof.
********** Build successful! **********
Microchip MPLAB XC8 C Compiler (PRO Mode) V1.33
Part Support Version: 1.33 (A)
Copyright (C) 2014 Microchip Technology Inc.
License type: Node Configuration
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\Engmet.h; 149. variable "_FlagAdok" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\Engmet.h; 131. variable "_FlagE1Buf" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\key.h; 37. variable "_FlagKeyUp" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\Engmet.h; 129. variable "_FlagMintOk" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\Engmet.h; 132. variable "_FlagRead5463ok" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\lcd.c; 262. variable "Fill_Sbmp@j" is not used
Warning [1090] E:\!wai\JACK\DC Energ\PRG18\Engmet18.c; 305. variable "SolarPanel@WatTemp" is not used
Memory Summary:
Program space used 4A10h ( 18960) of 8000h bytes ( 57.9%)
Data space used C6h ( 198) of 600h bytes ( 12.9%)
Configuration bits used 2h ( 2) of 7h words ( 28.6%)
EEPROM space used 0h ( 0) of 100h bytes ( 0.0%)
ID Location space used 0h ( 0) of 8h bytes ( 0.0%)
Data stack space used 0h ( 0) of 52Bh bytes ( 0.0%)
Loaded E:\!wai\JACK\DC Energ\PRG18\Engmet18.cof.
********** Build successful! **********
之前73% ,之后58%
之前没用的变量不提示,之后提示了。。。
谢谢楼主,谢谢原作者。 |
|