PIC24FJ128GA008仿真烧写问题

wenshaohua

大家好，我以前用PIC16系列的，现在改用PIC24系列的单片机，但是遇到了很多问题。程序编译正常，但是不管是仿真写程序还是烧录写程序，都会出现如下错误：
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to target
Target Device PIC24FJ128GA008 found, revision = Rev 0x3007
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 ready for next operation
Resetting Target
MPLAB ICD 2 ready for next operation
Programming Target...
...Validating configuration fields
...Erasing Part
...Programming Program Memory (0x0 - 0x2FF)
Verifying...
...Program Memory
ICD0161: Verify failed (MemType = Program, Address = 0x0, Expected Val = 0x40200, Val Read = 0x0)
ICD0275:  Programming failed.
MPLAB ICD 2 ready for next operation
程序是用C30编写的，我的芯片型号：PIC24FJ128GA008，有谁用过这款芯片嘛，能否教我在烧写时该如何进行配置。谢谢

wenshaohua

沉默非金啊，怎么就没人回啊。真的很急........

wenshaohua

问题解决，由于供电电压不过引起的....