请问RT－Thread(STM3210)的IAR ARM 工程是什么版本的啊？我用IAR ARM5.2版打开时，出现以

cyxavr · 发表于 2010-2-26 22:10:40

如题，如图

(原文件名:未命名.JPG)

软件提示信息：LOAD: Configuration 'Debug' in the project 'project' contains broken options for tool 'General':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'General': unsupported version - '.
  Options for 'General' will be set to default.
  Creating backup of original project file.
LOAD: Configuration 'Debug' in the project 'project' contains broken options for tool 'ICCARM':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'ICCARM': unsupported version - '.
  Options for 'ICCARM' will be set to default.
LOAD: Configuration 'Debug' in the project 'project' contains broken options for tool 'ILINK':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'ILINK': unsupported version - '.
  Options for 'ILINK' will be set to default.
LOAD: Configuration 'Release' in the project 'project' contains broken options for tool 'General':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'General': unsupported version - '.
  Options for 'General' will be set to default.
LOAD: Configuration 'Release' in the project 'project' contains broken options for tool 'ICCARM':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'ICCARM': unsupported version - '.
  Options for 'ICCARM' will be set to default.
LOAD: Configuration 'Release' in the project 'project' contains broken options for tool 'ILINK':
  The format of this file is not supported by this version of the workbench. It appears to have been written by a newer version of the workbench.

Diagnostics: 'Settings 'ILINK': unsupported version - '.
  Options for 'ILINK' will be set to default.

ffxz · 发表于 2010-2-26 22:25:25

我的是5.30，不过用得太少太少，用不顺手

cyxavr · 发表于 2010-2-26 22:33:22

那我去下一下5.3的。哈哈。

wingoing · 发表于 2011-7-16 21:44:03

我也遇到相同的问题了，敢问楼主怎么解决的啊

ffxz · 发表于 2011-7-16 22:43:14

换IAR ARM 6+，或者自己自动生成一个工程（用你的IAR创建一个template工程在stm32 bsp目录下）

请问RT－Thread(STM3210)的IAR ARM 工程是什么版本的啊？我用IAR ARM5.2版打开时，出现以

阿莫论坛20周年了！感谢大家的支持与爱护！！