|
发表于 2018-11-27 10:19:29
|
显示全部楼层
PD的特性
USB Type-C™ Power Delivery controller
The device embeds two controllers (UCPD1 and UCPD2) compliant with USB Type-C Rev.
1.2 and USB Power Delivery Rev. 3.0 specifications.
The controllers use specific I/Os supporting the USB Type-C and USB Power Delivery
requirements, featuring:
• USB Type-C pull-up (Rp, all values) and pull-down (Rd) resistors
• “Dead battery” support
• USB Power Delivery message transmission and reception
• FRS (fast role swap) support
The digital controller handles notably:
• USB Type-C level detection with de-bounce, generating interrupts
• FRS detection, generating an interrupt
• byte-level interface for USB Power Delivery payload, generating interrupts (DMA
compatible)
• USB Power Delivery timing dividers (including a clock pre-scaler)
• CRC generation/checking
• 4b5b encode/decode
• ordered sets (with a programmable ordered set mask at receive)
• frequency recovery in receiver during preamble
The interface offers low-power operation compatible with Stop mode, maintaining the
capacity to detect incoming USB Power Delivery messages and FRS signaling
拿来做过快充倒是不错,值得改改我的尼康相机的电池充电器,出门少带一个插座一根线了,省了STUSB45000/STUSB1602这些花钱的货。 |
|