|
|
用的是RT-Thread
STM32F107 用ISP下载一次程序后，JLINK再也不能调试了，总是提示 Programming failed
详情如下：
Load "D:\\My Documents\\Desktop\\LightCoordinator_RT_Thread_11_07_10\\bsp\\stm3210\\LightCoordinator\\obj\\LightCoordinator.AXF"
Set JLink Project File to "D:\My Documents\Desktop\LightCoordinator_RT_Thread_11_07_10\bsp\stm3210\LightCoordinator\JLinkSettings.ini"
JLink info:
------------
DLL: V4.24b, compiled Feb 22 2011 20:47:17
Firmware: J-Link ARM V8 compiled Jul 1 2011 12:02:49
Hardware: V8.00
S/N : 805306163
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: Found Cortex-M3 r1p1, Little endian.
ROMTableAddr = 0xE00FF003
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: Found Cortex-M3 r1p1, Little endian.
* JLink Info: Found SWD-DP with ID 0x1BA01477
* JLink Info: TPIU fitted.
* JLink Info: ETM fitted.
* JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots
* JLink Info: Found Cortex-M3 r1p1, Little endian.
Target info:
------------
Device: STM32F107RC
VTarget = 3.313V
State of Pins:
TCK: 0, TDI: 1, TDO: 1, TMS: 0, TRES: 1, TRST: 1
Hardware-Breakpoints: 6
Software-Breakpoints: 2048
Watchpoints: 4
JTAG speed: 50 kHz
Erase Done.
Programming Failed!
弹出对话框：
Error:FLash Download failed - "Cortex-M3"
之前没有问题的 |
阿莫论坛20周年了！感谢大家的支持与爱护！！
一只鸟敢站在脆弱的枝条上歇脚，它依仗的不是枝条不会断，而是自己有翅膀，会飞。
|
发表于 2011-7-20 08:34:07
楼主
