|
|
这个错误表示什么意思？什么地方不对，我之前将仿真器驱动都安装好了
Can't Initialize Target CPU:
Error 0x80002240/-171
Fatal Error during: Initialization, OCS, Control,
This error was generated by TI's USCIF driver.
SC_ERR_REG_DETECT_CTLR <-171>
The wrong controller port value has been used.
A controller cannot be detected even though the
selected port does match the hardware configuration.
The standard 560 ports are 0x0, 0x1, 0x2 and 0x3.
The standard EVM ports are 0x0, 0x1, 0x2 and 0x3.
The standard DSK ports are 0x378, 0x278 and 0x3BC.
The standard 510 ports are 0x240, 0x280, 0x320 and 0x340.
I/O Port = 240
Board Name: C5416 XDS510 Emulator
Cpu Name: CPU_1
Abort: Close Code Composer Studio.
Retry: Try to initialize the target again.
Ignore: Ignore the initialization error and start
without target debugging access.
Diagnostic: Run diagnostic utility.
|
阿莫论坛20周年了！感谢大家的支持与爱护！！
一只鸟敢站在脆弱的枝条上歇脚，它依仗的不是枝条不会断，而是自己有翅膀，会飞。
|
发表于 2013-1-16 13:00:49
楼主